Temperature measurement chip

A 16MHz crystal oscillator in Surface Mount Device (SMD) form is a compact electronic component that generates electrical oscillations at a frequency of 16 million hertz (16MHz) using a quartz crystal resonator. SMD components are designed for easy integration onto printed circuit boards (PCBs) using automated manufacturing processes. 16MHz SMD crystal oscillators are used in microcontroller systems, microprocessors, communication interfaces (UART, SPI, I2C), digital signal processors (DSPs), and other applications requiring precise timing.

Edit Content

User-Definable Nonvolatile (NV) Alarm

Settings

Alarm Search Command Identifies and Addresses Devices Whose Temperature is Outside Programmed Limits

Available in 8-Pin SO (150 mils), 8-Pin µSOP,and 3-Pin TO-92 Packages

Applications Include Thermostatic Controls,Industrial Systems, Consumer Products,Thermometers, or Any Thermally Sensitive

System

2 Byte User-Programmable EEPROM

ESD Rating: HBM8000V, MM800V

Edit Content

The QT18B20 digital thermometer provides 9-bit to 12-bit Celsius temperature measurements and has an alarm function with nonvolatile user-programmable upper and lower trigger points.

The QT18B20 communicates over a 1-Wire bus that by definition requires only one data line (and ground) for communication with a central microprocessor. It has an operating temperature range of -55°C to +125°C and is accurate to ±0.5°C over the range of -10°C to +85°C. In addition, the QT18B20 can derive power directly from the data line (“parasite power”), eliminating the need for an external power supply.

Each QT18B20 has a unique 64-bit serial code,which allows multiple QT18B20s to function on QT18B20 Programmable Resolution ,1-Wire Digital Thermometer,User-Definable Nonvolatile (NV) Alarm

Settings

Alarm Search Command Identifies and Addresses Devices Whose Temperature is Outside Programmed Limits Available in 8-Pin SO (150 mils), 8-Pin µSOP, and 3-Pin TO-92 Packages

Applications Include Thermostatic Controls,Industrial Systems, Consumer Products,Thermometers, or Any Thermally Sensitive

System

2 Byte User-Programmable EEPROM

ESD Rating: HBM8000V, MM800V

PIN CONFIGURATIONS

the same 1-Wire bus. Thus, it is simple to use one microprocessor to control many DS18B20s distributed over a large area. Applications that can benefit from this feature include HVAC environmental controls, temperature monitoring systems inside buildings, equipment, or machinery, and process monitoring and control systems.

Edit Content

Temperature measurement chip

Temperature measurement chip

Get a Quote

About A-Crystal

About A-Crystal

Service

Partners