- Product
- Application
- Support
- About Us
- News
- Contact
- CN
A 15 MHz crystal oscillator is an electronic component that generates a stable and precise frequency of 15 million cycles per second (15 MHz) using a quartz crystal as its frequency-determining element. This type of oscillator is used in various electronic applications where accurate timing and synchronization at this frequency are required. Oscilloscopes, spectrum analyzers, and other high-frequency test and measurement instruments might use 15 MHz oscillators for clocking.
Temperature Compensated Crystal Oscillators PTC7050A
RoHS Compliant Lead-free soldering
Electrical Parameters
| PARAMETER | CONDITIONS | VALUE | UNIT |
| Frequency range | 10~52 | MHz | |
| Supply voltage | 3.3 or 5.0 | V | |
| Supply current | Typical (depending in Vcc and output) | 2~10 | mA |
| Clipped sine wave - Output Voltage Swing (peak-to-peak) | Load = 10KΩ //10pF | 0.6~1.0 | V |
| HCMOS - Output Levels | Min/Max, 15pF Load | 0.9Vcc/0.1Vcc | V |
| Duty Cycle | HCMOS - Load = 15pF (2TTL) | 40/60 or 45/55 | % |
| Rise Time / Fall Time | 10~90% | 5 | ns |
| Start up time | Typical | 3 | ms |
| Enable / Disable | Min / Max | 0.8Vcc / 0.2Vcc | Vdc |
| Control Voltage | Optional | 0~Vcc | Vdc |
| Pull Range | ±3~±15 | ppm | |
| Linearity, max | Positive tuning slope | 10 | % |
| Initial Frequency Calibration | Measures at 25°C | ±1.0/±1.5 | ppm |
| Stability vs. Supply Voltage change | Vcc ±5% | ±0.05/±0.20 | ppm |
| Stability vs. Load change | Load ±10% | ±0.05/±0.20 | ppm |
| Stability over operating temperature | Referenced at 25°C | ±0.2/±0.28 | ppm |
| Overall frequency stability, max | Including 20 years of aging | ±4.60 | ppm |
| Phase noise @ freq. offset, typical | Δf=100Hz Δf=1KHz Δf=10KHz | -110 -135 -145 | dBc/Hz dBc/Hz dBc/Hz |
| Integrated Phase Jitter RMS, max | BW= 12KHz to 20MHz, Vcc ±5%, 15pF load | 1.0 | ps |
| Operating temperature | -20~70 -40~85 | °C | |
| Storage temperature | Absolute max | -55~+125 | °C |
Dimensions
FAQ:
| Series Product | Quartz crystal size | Lead Time |
| HC49 Series | HC-49SMD,HC-49S,HC-49U | 1-2 weeks |
| SMD quartz Crystals | 2012/2016/2520/3225/5032/6035/7050/8045 | 1-4 weeks |
| SMD crystal Oscillators | 2016/2520/3225/5032/7050 | 1-3 weeks |
| TCXO | 2520/3225/5032 | 2-5 weeks |
| SMD Watch/tuning fork Crystals | PSX315/PSX415/PSX519/PMX145/PMX206/PMX206F/PMX206FA/PMX405/PMX406 | 1-2 weeks |
| VCXO | 2520/3225/5032 | 2-5weeks |
| TCVCXO | 2520/3225/5032 | 2-5weeks |
| DIP Watch/tuning fork Crystals | DT206/DT308 | 1-2weeks |
| ZTA/ZTT Series | ZTTCC/ZTACC/ | 1-2weeks |
12.Free crystal samples and shipment fee ?
We provide you 20pcs free quartz crystals samples [no free samples for oscillators and TCXO,VCXO, and VCTCXO]. Customers to pay only the shipping fees.
| SMD or DIP | Crystal package size[mm] | 2pads ,3pads or 4pads... |
| Frequency: GHz,MHz or KHz | frequency tolerance[ppm] | frequency characteristics over temperature[ppm] |
| load capacitance[pF] | operating temperature[℃] | resistance(ESR)[Ω/㏀] |
| Supply Voltage[V] | Output type | application |
| Crystal Bar | China |
| Base | NEC (Japan) |
| Outer covering | NEC (Japan) |
| Resin | HENKEL (Germany) |
| High-temperature crystal | KDS (Japan) |
15. DIP cylinder crystal Production & Test Equipment
| Equipment Name | Manufacturer | Quantity | Purpose |
| Coaters | Korea | 3 | put the silver on the tuning fork tips |
| Auto Dispensing | Japan | 5 | Stick the crystal on base |
| Fine tuning | China | 32 | Frequency modulation and control |
| Welding | China | 12 | To weld the outer covering and base |
| Laser Marking | China | 3 | Marking on the outer covering |
| 250B | USA | 3 | Test the frequency |
| High and low temperature testing | USA | 3 | High and low temperature testing |
| Automatic testing | China | 8 | Test the crystal |
Insulated resistance tester
| China | 6 | Test the crystal |
| NO. | Use process | Equipment Name | Model | manufacturer | Unit | Quantity |
| 1 | Pin bending | Auto pin bending | DT206/308 | CHINA | PCS | 2 |
| 2 | Pin cutting | Auto pin cutting | DT308/206 | CHINA | PCS | 6 |
| 3 | Spot welding | spot welding | SW-Ⅱ | CHINA | PCS | 16 |
| 4 | Auto spot welding | SW-300(refit ) | CHINA | PCS | 2 | |
| 5 | Plastic package | HF Preheat machine | HDP-320 | CHINA | PCS | 4 |
| 6 | hydraulic machine | MP-125 | CHINA | PCS | 4 | |
| 7 | Orthopedic | Hydraulic Presses | YN-12 | CHINA | PCS | 10 |
| 8 | Marking | Laser Marking | YAG-M-50 | CHINA | PCS | 5 |
| 9 | Testing equipment | Clock Tester | QWA-5A | CHINA TW | PCS | 1 |
| 10 | Crystal impedance meter | FT-327B | CHINA | PCS | 20 | |
| 11 | network analyzer | 250B | USA | PCS | 3 | |
| 12 | Frequency meter | FT-100T | CHINA | PCS | 15 | |
| 13 | Automatic testing | BJ-308/206 | CHINA | PCS | 20 | |
| 14 | crystal calibration | GY3020 | CHINA TW | PCS | 1 | |
| 15 | Crystal impedance meter | CZ-5C | CHINA TW | PCS | 1 | |
| 16 | Spectrometer | ZDX8600 | CHINA TW | PCS | 1 | |
| 17 | Reflow | T1000 | CHINA | PCS | 1 | |
| 18 | Insulated resistance tester | TH3681A | CHINA TW | PCS | 1 | |
| 19 | Incubator | 4310 | USA | PCS | 4 | |
| 20 | Taping | Auto Taping | PMX206 | CHINA | PCS | 9 |
Ø A-crystal supports its customer base through the pursuit of continuous quality improvement.
Ø World-Class leading product designs.
Ø ISO-9001 certified production and Quality management
Ø Reliability testing for all products to ensure quality stability.
Ø Strict quality evaluation of all raw material suppliers
Ø Customers satisfaction feedback program for quality assurance
Ø Complete sales & after-sales quality service and customer care
Ø Regular employee trainings to achieve continuous quality improvement.
Management participation programs to promote commitment to highest quality standards and customer focus.
Soldering Characteristics
A variety of methods can be used to solder A-Crystal products to PCB and substrates
Ø Wave or Dual Wave
Ø Hot Air or Convection Flow
Ø Vapor Phase Reflow
Ø Infrared Reflow
Ø Bubble Solder Immersion
Ø Tohers (Laser,etc)
| Model | Pre-heating time | Reflow Temperature | Reflow time |
| SMD Tuning fork 01(lead free) | 60-120 Seconds | 230℃ Max | 10 Seconds Max |
| SMD Tuning fork 02(no lead free for solder, but ROHS compliant) | 30-60 Seconds | 260℃ Max | 10 Seconds Max |
| HC-49U | 30-60 Seconds | 250℃ Max | 10 Seconds Max |
| HC-49S series | 30-60 Seconds | 250℃ Max | 10 Seconds Max |
| HC-49SM series | 30-60 Seconds | 250℃ Max | 10 Seconds Max |
| UM series | 30-60 Seconds | 250℃ Max | 10 Seconds Max |
| SMD crystal units | 30-60 Seconds | 250℃ Max | 10 Seconds Max |
| Clock Oscillator | 30-60 Seconds | 250℃ Max | 5 Seconds Max |
| VCXO | 30-60 Seconds | 250℃ Max | 5 Seconds Max |
| SMD oscillator | 30-60 Seconds | 260℃ Max | 10 Seconds Max |
| Ceramic Resonator | 30-60 Seconds | 225℃ Max | 10 Seconds Max |
| Ceramic Filter | 30-60 Seconds | 225℃ Max | 10 Seconds Max |
Package is made of corrugated paper with thickness of 0.8cm.
Each Package contains 10 inner boxes, each box has 1 plastic reel
Each reel has 3000 pieces of Crystal Resonators
Therefore Total package contains 30,000 pieces of crystal resonators.
Large package contains 20 inner boxes （60, 000 pieces of crystal resonators）
Pricing: Highly competitive pricing
Quality: ISO 9001 certified quality system and knowledgeable quality assurance team.
Delivery : Short lead-time for standard products and on time delivery for customized products.
Service: Comprehensive skilled technical support
